Manitou ULM 415 H

🟥 | Construction Telehandler

DATA SHEET
sPEAK TO A SPECIALIST

LEARN MORE ABOUT THE Manitou ULM 415 H

Read More

Capacities

Description Unit
Max. Capacity 1,500 kg
Max. Lifting Height 4.30 m
Max. Outreach 2.62 m
Reach at Max. Height 1 m
Breakout Force with Bucket 1,880 daN

Weight & Dimensions

Description Unit
Shipping Mass (Min. / Max.) 2,700 kg / 2,900 kg
Ground Clearance 0.29 m
Wheelbase 2.13 m
Overall Length to Carriage (With Hitch) 3.47 m
Overall Length to Carriage (Without Hitch) 3.47 m
Front Overhang 0.77 m
Overall Width 1.49 m
Overall Cab Width 0.66 m
Overall Height 1.92 m
Tilt-Down Angle 116 °
Tilt-Up Angle 23 °
External Turning Radius (Over Tyres) 2.62 m
Standard Tyres CAMSO — MPT 552 — 10.0/75-15.3 124A8

Performances

Description Unit
Lifting 8.80 s
Lowering 7.00 s
Extension 6.40 s
Retraction 4.30 s
Crowd 3.40 s
Dump 2.60 s

Engine

Description Unit
Engine Brand Yanmar
Engine Norm Stage V / Tier 4 final
Engine Model 3TNV88C-DMU
Number of Cylinders — Capacity of Cylinders 3 — 1,642 cm³
I.C. Engine Power Rating / Power 35.10 Hp / 26.20 kW
Max. Torque / Engine rotation 105 Nm @ 1,950 rpm
Drawbar Pull (Laden) 2,000 daN
Reversible Fan Option
Engine Cooling System 3 radiators (water + hydraulic oil + fuel)
HVO Validated (According to En 15940 Standard) Yes

Transmission

Description Unit
Transmission Type Hydrostatic
Number of Gears (Forward / Reverse) 2 / 2
Max. Travel Speed (may Vary According to Applicable Regulations) 25 km/h
Differential Lock Limited slip differential on front and rear axles
Parking Brake Automatic negative parking brake
Service Brake Hydraulic servo brake

Hydraulics

Description Unit
Hydraulic Pump Type Gear pump
Hydraulic Flow — Pressure 48 l/min — 235 bar
Flow Sharing Distributor Standard

Tank Capacities

Description Unit
Fuel Tank 35 l

Noise & Vibration

Description Unit
Noise at Driving Position (lp A) Tested Following Nf en 12053 Norm 76 dB
Noise to Environment (LwA) 104 dB
Vibration on Hands/Arms < 2.50 m/s²

Miscellaneous

Description Unit
Safety Cab Homologation ROPS — FOPS cab (level 1)
Controls JSM

Manitou ULM 415 H on Tyres with Forks (Metric)

A load chart for the Manitou ULM 415 H showing various lifting capacities at different angles and reach distances. The chart is structured in a grid format with angles from 0 to 50 degrees marked along the left side, and distance measurements along the bottom. Highlighted zones indicate maximum lifting capacities ranging from 550 kg to 1,500 kg depending on the angle and extension of the arm.

Related machines